Task Management for Restaurants: Who Does What, When
Task management for restaurants is how you make sure the right things get done at every site, by the right person, at the right time, and that you know about it. Fridge temperatures, the closing clean, the allergen check on the new special, the broken ice machine. At one site a good manager holds it all in their head. At ten sites, nobody can. This guide covers the four parts that make it work across a group: daily lists, accountability, follow-up and reports.
What is task management in a restaurant?
Task management in a restaurant is the system behind “who does what, when”: which tasks need doing, who owns each one, when they are due and how a manager knows they were done. It covers the routine (opening, closing, cleaning, checks) and the one-offs that come up mid-shift (a delivery to check, a repair to chase).
Most restaurants already have a system. It is just spread over a whiteboard in the kitchen, a clipboard by the pass, a group chat and a lot of “can you just…”. That works until the person who holds it together is off.
Why tasks slip at multi-site groups
- Lists live on paper. You find out what was skipped when the inspector, the area manager or a guest does.
- Everyone’s job is nobody’s job. “Someone should clean the fryer” means nobody does.
- Every site runs its own version. Ten opening lists, ten standards, and no way to compare.
- Follow-up depends on visits. An area manager covering eight sites sees each one maybe once a week. The other six days are a guess.
- Problems get lost in chat. “Ice machine’s broken again” scrolls away under 40 messages about swaps.
The four parts of restaurant task management
1. Daily lists
The routine tasks, written down once and repeated every day: opening, closing, cleaning, checks. Split them by role so the kitchen sees kitchen tasks and the bar sees bar tasks. Our free restaurant checklist templates give you opening and closing checklists, a cleaning schedule and a shift handover sheet to start from.
2. Accountability
Every list has an owner on every shift, and every task has a clear “done”: “Fridge 1 at or below the limit, reading written down”, not “check fridges”. People can only be accountable for something they can check.
3. Follow-up
Someone looks at what was done, every day, and asks about the gaps. Not to catch people out: a task that keeps getting skipped is usually a sign the list is too long, the timing is wrong or the shift is short-staffed.
4. Reports
Some things don’t belong on a list: the walk-in that won’t hold temperature, a guest who slipped, a new hire request. They need a report that reaches the right person, an owner, a status and a follow-up until it is closed.
Delegating tasks to staff
Delegating tasks to staff well is most of task management. Five rules:
- One task, one owner. Name the role or the person, never “the team”.
- Say what done looks like. A photo of a clean station on the wall beats a paragraph.
- Set a time. “Before service” or “by 15:00”, not “today”.
- Show it once. Walk a new starter through the closing clean, then link to the written steps. Our guide to writing standard operating procedures covers how to write them so people follow them.
- Check it and say so. A quick “the bar looked great this morning” does more for the next close than a rule.
Daily task lists by role
A starting point for a casual dining site. Keep each list short enough to finish on a busy day.
| Role | Opening | During service | Closing |
|---|---|---|---|
| Kitchen | Fridge and freezer temperatures, hand-wash basins stocked, surfaces sanitised, use-by dates checked | Hot-holding temperatures, clean as you go, restock the line | Food covered and dated, equipment off, deep clean of the line, bins out |
| Bar | Ice machine and glass washer on, garnishes prepped, fridges stocked | Restock, glass collection, drip trays | Nozzles and drip trays cleaned, glass washer drained, fridges restocked |
| Front of house | Tables, menus and toilets checked, card machines charged, float counted | Toilet checks, table resets | Tables cleared, chairs up, till cashed up |
| Manager | Rota checked, pre-shift briefing, yesterday’s lists read | Floor walk, problems logged | Lists signed off, handover written, lock-up |
How to follow up across sites
For an area manager or ops director, task management is mostly follow-up. What works:
- The same lists everywhere. You can only compare sites that are measured the same way.
- Look before you visit. Check how far each site got yesterday, then spend the visit on the sites that need it.
- Look for patterns, not misses. One skipped task is a busy night. The same task skipped at the same site every Saturday is a list, timing or staffing problem.
- Close the loop. When a site fixes something, tell them you noticed. When a report comes in, say what happens next.
- Change the list when the business changes. New menu, new equipment, new opening hours: update the lists that week, at every site.
Paper, spreadsheet or app?
- Paper is fast and everyone gets it. It tells you what happened a day later, at one site, if the sheet is found.
- A spreadsheet adds counting and a master copy. It still lives on one laptop, and copies drift apart once you have more than a few sites.
- An app puts the list on the phone staff already carry, repeats it every day by itself and shows head office every site in one view. It is worth it once you can’t see all your sites from where you stand.
How All Gravy handles task management across sites
All Gravy to-do lists live in the same branded app your team uses for chat and training:
- Opening, closing and cleaning lists on the phone, with a list for each location and role, ticked off as people go.
- Lists that repeat themselves, daily, on set weekdays or monthly, ready when the shift starts.
- See what is done at every site from the web app, and pick any past date to see what was ticked off that day.
- One standard, copied in seconds to a new site.
- Report templates for the things that aren’t on a list: staff add a photo, it goes to the people you chose, and you follow every case to the end with a status and comments.
The standard behind each task can sit in Handbooks, so the person ticking “clean the slicer” can open how it’s done. Book a demo and bring one of your paper checklists.
Frequently asked questions
What is task management for restaurants?
It is how a restaurant decides which tasks need doing, who does them and when, and how a manager knows they were done: opening and closing routines, cleaning, temperature checks, prep and the one-off jobs that come up during a shift.
How do you delegate tasks to restaurant staff?
Give every task one owner, say what done looks like, set a time, show how it is done once (or link to the SOP), and check it afterwards. Thank people when it is done right and fix the list, not the person, when it keeps going wrong.
What tasks should be on a daily restaurant task list?
Opening tasks (safety walk-round, temperature checks, set-up), tasks during service (restocking, toilet checks, temperature checks on hot holding), and closing tasks (food stored, cleaning, cash-up, lock-up). Split them by role, so kitchen, bar and front of house each see their own list.
How do area managers keep track of tasks across sites?
With the same lists at every site and one place to see how far each site is, so they can look before they visit instead of finding out when they arrive. Patterns matter more than single misses: the same task missed at the same site points to a list or staffing problem.
Is a spreadsheet enough for restaurant task management?
For one site with one manager, often yes. Across several sites a spreadsheet can’t show you in real time what was done and where, and the copies drift apart. That is the point where an app pays off.
What is the difference between a task list and a report?
A task list is planned work that repeats: open, clean, check, close. A report is something unplanned that needs someone to act, like a broken fridge or a guest injury. Reports need an owner, a status and a follow-up until they are closed.