Labour Cost Percentage: How to Calculate and Control It

Labour cost percentage formula: labour cost divided by sales, times 100

Labour cost percentage is your total labour cost divided by your sales for the same period, times 100. Spend £12,000 on staff in a week where you take £40,000 and your labour cost percentage is 30%. It’s the number most hospitality groups run their rotas to, and this guide covers how to calculate it properly, what UK restaurants actually spend, a worked week for a six-site group and how to bring it down without cutting service.

All Gravy Scheduling, launching now, shows labour cost while you build the rota, per day and per site. See Scheduling or book a demo.

What is labour cost percentage?

Labour cost percentage tells you how much of every pound you take goes on the people who earn it. It’s a ratio, so it works for a single Tuesday lunch, a whole site’s week or a 40-site group’s year:

Labour cost percentage = labour cost ÷ sales × 100

Two things make the number useful. It scales with trade, so a busy week can carry more hours than a quiet one. And it compares, so you can line up six sites of different sizes and see which one is drifting.

How to calculate labour cost percentage

  1. Pick the period. A week is the sweet spot: long enough to smooth out one odd day, short enough to act on.
  2. Add up labour cost for that period. Everything you pay for staff time, including the employer costs on top of pay (see the next section).
  3. Take net sales for the same period. Sales after VAT and discounts, the same figure you report on.
  4. Divide and multiply by 100. £11,400 ÷ £38,000 × 100 = 30%.

The two mistakes that make labour look cheaper than it is: using gross pay without employer costs, and comparing this week’s rota against last week’s sales.

What counts as labour cost

Labour cost is everything you pay because someone worked, or is entitled to time off. In the UK that means more than the hourly rate:

IncludeWhy
Gross wages and salaries, overtime and premiumsThe core of it. Salaried managers count too
Holiday payStaff get 5.6 weeks paid holiday a year (gov.uk), and the shifts still need cover
Employer National Insurance15% on earnings above £5,000 a year (£96 a week) in 2026/27 (gov.uk)
Employer pension contributionsMinimum 3% under auto-enrolment, on qualifying earnings between £6,240 and £50,270 (gov.uk)
Statutory sick, maternity and paternity pay you fundPaid for time not worked
Agency and freelance staffThey cover shifts, so they belong in the same number

Usually left out: tips and tronc paid out from customers (the money passes through to staff), recruitment fees and training courses. Some groups put those in a “fully loaded” figure. Either way works, as long as every site counts the same things.

The Employment Allowance (£10,500 in 2026/27) reduces the employer National Insurance bill for eligible employers. If you claim it, spread it across the year rather than letting it flatter April.

The loaded hourly cost

To plan a rota you need the cost of one hour of staff time with everything on top. An example for a team member on £13.00 an hour working 30 hours a week:

WHAT YOU PAYWHAT IT COSTSHOURLY PAYHOLIDAY COVEREMPLOYER NIPENSIONLOADED HOURUSE THIS TO PLAN
ItemPer week
Pay: 30 hours × £13.00£390.00
Employer NI: (£390 - £96) × 15%£44.10
Employer pension: (£390 - £120) × 3%£8.10
Holiday cover: 12.07% of pay£47.07
Loaded cost for 30 hours£489.27
Loaded hourly cost£16.31

So an hour on the rota at £13.00 really costs about £16.30. The £120 is the weekly equivalent of the £6,240 lower limit for qualifying earnings. 12.07% is the share of hours that 5.6 weeks of holiday adds (5.6 ÷ 46.4 working weeks). Contracts with more holiday, or a pension scheme that pays more, push it up.

What is a good labour cost percentage for a restaurant?

There’s no single right number. A counter-service concept with a short menu runs a very different labour model from full table service with a big kitchen brigade. But you can see where the sector sits. From the ONS Annual Business Survey (2024 data, published May 2026), employment costs as a share of turnover:

Sector (UK)Employment costs ÷ turnover
Restaurants and mobile food service33.7%
Pubs and bars32.5%
All food and beverage service34.6%
Hotels and other accommodation29.7%
Accommodation and food services overall33.2%

Calculated from ONS Annual Business Survey, UK sections A to S. ONS employment costs include employer National Insurance and pensions, so they match the definition above. These are averages across every business size, not targets.

Two things to take from it. First, about a third of every pound UK restaurants take goes on staff. Second, it’s rising: for restaurants the same figure was 31.8% in 2022. The April 2026 rise in the National Living Wage to £12.71 (gov.uk) added around £1.4bn to the sector’s costs, according to UKHospitality, and the rate goes to £13.21 in April 2027.

Many groups also track prime cost: labour plus food and drink cost as a share of sales. It stops a kitchen saving on labour by buying in prepared food that costs more, or the other way round.

Labour forecasting: set the number before the week starts

Labour cost percentage tells you what happened. Labour forecasting decides what’s allowed to happen. It turns your sales forecast into a budget of hours:

Hours you can schedule = forecast sales × target labour % ÷ loaded hourly cost

  1. Forecast sales by day, then by hour. Same week last year, adjusted for bookings, events, weather and school holidays.
  2. Apply your target. £40,000 forecast × 30% = £12,000 for labour.
  3. Convert to hours. £12,000 ÷ £16.31 = about 735 hours for the week.
  4. Spread the hours to follow demand. Busy days and hours get the people, quiet ones get fewer. That’s where the rota starts: our guide on how to make a staff rota walks through it step by step.
  5. Check planned against actual every week. The gap is where the money goes.

Salaried managers sit in the budget whatever the sales, which is why labour percentage climbs fast in a quiet week. Plan the hourly team around them.

Worked example: a six-site group

Say you run six casual dining restaurants with a group target of 30% and a loaded hourly cost of £16.31. Here are the actual numbers for one week. They’re illustrative.

SiteSalesLabour costLabour %
Manchester£48,000£13,90029.0%
Leeds£41,000£12,20029.8%
Liverpool£38,500£11,30029.4%
Sheffield£33,000£11,60035.2%
Newcastle£36,000£10,50029.2%
York£29,500£8,90030.2%
Group£226,000£68,40030.3%

At group level the week looks fine: 30.3% against a 30% target. Site by site, one restaurant is carrying the problem. Sheffield is 5 points over, worth about £1,700 this week.

Looking at Sheffield’s hours explains it. Two servers were rota’d for a full Tuesday and Wednesday lunch that took half what the forecast said. Two kitchen shifts ran an hour over every night because a new starter wasn’t trained on the grill yet. And a Saturday no-show was covered by agency at a higher rate.

None of that needs a cut to the Friday or Saturday team. The fix is a shorter lunch rota on quiet days, getting the new starter trained this week, and a site-to-site cover list so Saturday gaps go to a colleague from Leeds before an agency. Sheffield lands at 31% the week after, and nobody notices a difference on the floor.

How to lower labour cost percentage without cutting service

Cutting hours at the peak saves money for a week and costs you guests and staff for months. These levers work instead:

TRIM THE SHOULDERS, NOT THE PEAKFRIDAY 8PMQUIET HOURS: TRIMTHE RUSH: KEEP
  • Plan to the hour, not the day. Stagger starts to follow the curve. A 15:00 start that should be 17:00 is two hours of labour with no covers behind it.
  • Trim the shoulders. Quiet openings, the afternoon lull and late finishes are where hours hide. Keep the strongest people on the rush.
  • Watch overtime and agency. Both are usually a symptom: of short staffing, poor cover or people leaving. Track them per site, every week.
  • Fix the rota before payday, not after. See planned cost while you build the week, approve hours before payroll, and ask about every gap between the two.
  • Share staff across sites. A trained server from a site 15 minutes away is cheaper and better than an agency worker who’s never seen the menu.
  • Keep people. Every leaver means recruiting, training and weeks of a new starter at half speed, often covered by overtime. Our Hospitality Retention Benchmark 2026 found the most engaged third of hospitality staff leave at 3.8% per quarter, against 12.2% for the least engaged third.
  • Don’t let rest breaches force your hand. A rota that breaks the 11-hour rest rule gets fixed at the last minute, usually with overtime or agency. Catch it while you plan.

Running one small site? Our free staff rota template adds up hours and labour cost per day as you type.

Labour cost across multiple sites

At one site, a good GM keeps labour in their head. At five or more, the same problems show up in the same places: every site calculates it differently, the number arrives when the accounts close, and nobody can see that Sheffield is 5 points over while there’s still time to act. That’s why labour cost belongs inside workforce management, not in a spreadsheet next to it.

All Gravy Scheduling is a new AI-powered evolution of our scheduling product, launching now, in the same app your team uses for chat and training:

  • Labour cost while you plan. See what the week costs per day, department and site while you can still change it.
  • Rotas that keep to the rules. A rest or hours breach shows up before you publish, not on payday.
  • Cover from your own team first. Open shifts and swaps happen in the app, with a manager’s OK, across sites.
  • Hours approved before payroll. What people actually worked is checked against the plan before anyone gets paid.

Want to see it with your own sites? Book a demo.

FAQ

What is labour cost percentage?

Labour cost percentage is your total labour cost divided by your sales for the same period, times 100. If a restaurant takes £40,000 in a week and its staff cost £12,000, its labour cost percentage is 30%.

How do you calculate labour cost?

Add up everything you pay for staff time in the period: gross wages and salaries, overtime, holiday pay, employer National Insurance, employer pension contributions and agency staff. Divide that by net sales for the same period and multiply by 100 to get the percentage.

What is a good labour cost percentage for a restaurant?

There’s no single right number: it depends on your concept, prices and service model. As a reference, ONS Annual Business Survey data for 2024 shows UK restaurants spent 33.7% of turnover on employment costs, pubs and bars 32.5% and accommodation 29.7%. Set your own target per site and track it every week.

Does labour cost include employer National Insurance and pension?

Yes. Employer National Insurance (15% on earnings above £5,000 a year in 2026/27) and employer pension contributions are part of what staff cost you, so they belong in labour cost. Leaving them out makes the percentage look several points better than it is.

Should tips be included in labour cost?

Tips and tronc paid out from customers usually stay out of both sales and labour cost, because the money passes through the business to staff. What matters most is that every site counts them the same way, so the percentages compare.

What is labour forecasting?

Labour forecasting means estimating sales or covers for each day and hour ahead, then working out how many staff hours you can afford at your target labour cost percentage. You divide the labour budget by the loaded cost of an hour to get the hours you can schedule.

Take your people and culture to the next level

  • 350+ hospitality brands
  • 4,000+ locations
  • 4.7 on G2
The All Gravy app on a phone: feed with the channels For you, General, Customer love and Office